Field Service Ver. 4.0 Feb. 2006
6.3.15
Paper Pick-up Unit
1. Remove the Rear Cover.
☞ 32
2. Remove the Right Cover.
☞ 34
3. Remove the Left Cover.
☞ 33
4. Remove the High Voltage Unit and Shield.
☞ See the removal procedure steps 1 to 2 of "Tray1 Paper Pick-up Solenoid" on p. 56.
5. Remove the Rack Drive Assy.
☞ See the removal procedure steps 1 to 3 of "Developing Motor" on p. 54.
[1]
[4]
[3]
[2]
4139fs2077c1
[4]
4139fs2063c3
6. Remove the Ventilation Fan Motor.
☞ 53
7. Remove one screw [1], unlock two
tabs [2] and remove the Ventilation
Fan Duct [3].
8. Lay the main body of the printer on
its back.
9. Remove five screws [4].
6. Other
51