Date & Time; Energy Saver; Energy Saver Mgt - Konica Minolta magicolor 2400W Service Manual

Field Service Ver. 4.0 Feb. 2006
B. SYSSTART
Function • Selects whether or not the PostScript format definitions file is applied when the
printer is turned on.
Use • To specify whether to apply the PostScript format definitions file.
YES: The PostScript format definitions file is applied.
NO : The PostScript format definitions file is not applied.
Setting • The default setting is NO.
/procedure
12.7.5 DATE & TIME
Function • Sets the TOD (time-of-day) clock on the hard disk.
Use • To adjust the TOD clock on the hard disk.
• The settings appear in the following order: year, month, day:hour, minutes, seconds.
NOTE
• This menu item appears only if an optional hard disk installed.
Setting 1. Select "DATE & TIME."
/procedure 2. Using
3. Accept the date and time setting using the Menu Select key.
12.7.6

ENERGY SAVER

Function • Specifies the length of time before the machine enters Energy Saver mode after the
last print is received or the last key operated.
Use • To set the amount of time before the machine enters Energy Saver mode.
Setting • The default setting is 30 MINUTES.
/procedure
15 MINUTES
* Displayed only on the model for the 110 V models.
NOTE
• This setting is available only when SYSTEM DEFAULT→ ENERGY SAVER MGT
is set to "ON."
12.7.7

ENERGY SAVER MGT

Function • Sets whether the printer should go into Energy Saver mode when not printing or pro-
cessing a print job and when the Control Panel is not being used.
Use • To specify whether Energy Saver mode is to be used.
Setting • The default setting is ON.
/procedure
NOTE
• This menu item is available only on the 110 V model.
YES
▲ ▼
, , , and keys, enter the time-of-day, and day, month, and year.
"30 MINUTES"
"ON"
12. Menu (magicolor 2450)
"NO"
1 HOUR 2 HOURS *
OFF
109
2