Konica Minolta magicolor 2400W Service Manual page 153

14. Service Mode (magicolor 2430 DL)
Use
PageScope
Web Connection
*2 XXXXXX are the low-order 6 digits of the printer MAC address.
Setting 1. Take note of the current setting.
/procedure 2. Enter the SERVICE/SERVICE PERSON mode.
3. Select RESTORE FACTORY DEFAULT and press the Menu Select key.
4. When the initialization procedure is completed, restart the machine.
5. Make the settings that were valid before initialization once again.
NOTE
• The reinitialization procedure resets the settings and counter values backed
up in the parameter chip on the Mechanical Control Board. Use utmost care
whenever executing reinitialization.
• After the reinitialization has been executed, be sure to replace all Toner Car-
tridges, 2nd Transfer Roller, Transfer Belt Unit, Fusing Unit, and Drum Car-
tridge with new ones.
118
Item
Admin. Password
Refresh Rate
KONICA MINOLTA
Contact Name
Customer Support
http://printer.
Contact Information
konicaminolta.com/
Product Help URL http://pagescope.com/
http://printer.
Corporate URL
konicaminolta.com/
Supplies and Acces-
http://www.q-shop.com/
sories
http://printer.
Online Help URL
konicaminolta.com/
Auto IP
WINS/NetBIOS
Resolution
NetBIOS Name
Domain/Workgroup
Use DHCP for WINS
Primary WINS
Secondary WINS
Rendezvous Service
Discovery
Rendezvous Config
Printer Name
Rendezvous Config
Host Name
IPP Config
Printer Name
IPP Config
Printer Location
Field Service Ver. 4.0 Feb. 2006
Factory Default Value
administrator
30 seconds
DHCP
Checked
MC2430DLXXXXXX *2
WORKGROUP
Checked
grayed out/disabled
grayed out/disabled
Checked
KONICA MINOLTA
magicolor 2430 DL
MC2430DLXXXXXX *2
magicolor 2430 DL
Blank
Ref. Page
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-