Power Unit (Pu) - Konica Minolta magicolor 2400W Service Manual

Field Service Ver. 4.0 Feb. 2006
6.3.11

Power Unit (PU)

[2]
[3]
[4]
NOTE
A
• When mounting Parameter Chip
A
4138fs2544c0
1. Remove the Mechanical Control
☞ 41
2. Remove the Print Control Board.
☞ 36
3. Disconnect the two connectors [2]
[1]
4139fs2021c1
4. Remove two screws [5] from the
[6]
NOTE
• One of the two screws is used to
[5]
4139fs2074c1
(PJ26), align the notches (indicated
by "A" in the illustration).
Board.
(red and black) of the Fusing Safety
Switch [1] and remove the wire from
the two wiring saddles [3].
Power Switch Assy [4] and remove
the wire from the wiring saddle [6].
secure the Power Switch Assy to
the High Voltage Unit.
6. Other
43