12. Menu (magicolor 2450)
12.9 ENVIRONMENT MENU
<Procedure to enter the ENVIRONMENT MENU>
• At the top level (Idle status), press the ▲ key for 3 to 4 seconds. Then go into the menu
and press left arrow key. The ENVIRONMENT MENU appears.
12.9.1
ALTITUDE SETUP
Function
• Optimizes the image by varying the output value of the developing bias when an
Use
• To adjust the developing when an image problem (uneven density) occurs in an envi-
Setting
• The default setting is 0.
/procedure
1. Call the ENVIRONMENT MENU to the menu screen.
2. Select ALTITUDE SETUP using the < or > key and press the Menu/Select key.
3. In ALTITUDE SETUP, press the < or > key as necessary to select the appropriate
4. Press the Menu/Select key to accept the new setting.
NOTE
• After the setting has been changed, be sure to run REQUEST AIDC (QUALITY
112
2
image problem occurs due to the atmospheric pressure at high altitudes.
ronment of low atmospheric pressure in places such as at high altitudes.
altitude setting value.
Setting Value
0
1
2
3
MENU).
Field Service Ver. 4.0 Feb. 2006
Adjustment range: 0 to 3
Developing Bias Value
No offset
100 V
200 V
300 V