Torque Limiter - Konica Minolta magicolor 2400W Service Manual

6. Other
6.3.28

Torque limiter

[2]
[1]
[2]
60
[1]
4139fs2512c0
4139fs2513c0
[3]
4139fs2530c0
[4]
4139fs2531c0
Field Service Ver. 4.0 Feb. 2006
A. Removal Procedure
1. Remove the Paper Pick-up Unit.
☞ 51
2. Remove the screw [1] and the Paper
Pick-up Clutch.
3. Disassemble the Paper Pick-up
Clutch and remove the torque limiter
[2].
B. Reinstallation Procedure
NOTE
• There are five slots provided in the
coupling gear [1] of the Paper Pick-
up Clutch. These slots are for
adjusting the position of the Pick-
up Roller.
When the torque limiter [2] is rein-
stalled, it is necessary to adjust the
position of the coupling gear [1]
and torque limiter [2] so that any
paper take-up failure can be pre-
vented.
1. Install the Paper Pick-up Clutch [3].
2. Turn the Paper Pick-up Clutch [3] in
the direction of the arrow shown on
the left until it is engaged with the
solenoid and stopped.
3. If the Pick-up Roller [4] tilts in the
clockwise direction, turn the coupling
gear of the Paper Pick-up Clutch in
the direction of A and reassemble
the Paper Pick-up Clutch.