Programming The Temperature; Programming The Time - Jura IMPRESSA F70 Instructions For Use Manual

READY
Press the Rotary Switch (1) until
FILTER – / appears
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until Aroma is displayed.
AROMA
Press the Rotary Switch (1).
INTENSIVE
Turn the Rotary Switch (1) until the following message is displayed:
STANDARD
Press the Rotary Switch (1) to save the setting.
AROMA
Turn the Rotary Switch (1) until
EXIT appears
Press the Rotary Switch (1) to leave the programming mode.
READY

15.5 Programming the temperature

READY
Press the Rotary Switch (1) until
FILTER – / appears
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until Temperature is displayed.
TEMPERATURE
Press the Rotary Switch (1).
HIGH
Turn the Rotary Switch (1) to change the temperature from HIGH to
NORMAL (or vice versa).
NORMAL
Press the Rotary Switch (1) to save the setting.
TEMPERATURE
Turn the Rotary Switch (1) until
EXIT appears
Press the Rotary Switch (1) to leave the programming mode.
READY

15.6 Programming the time

You must programme the time if you want to use the auto-
matic switch-on function.
READY
Press the Rotary Switch (1) until
FILTER – / appears
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until TIME is displayed.
TIME
Now press the Rotary Switch (1) to start programming the time.
--:--
Turn the rotary Switch (1) to adjust the hours..
12:--
Press the Rotary Switch (1) to confirm the hour settings and to
activate the minutes.
12:--
E
19