Table of Contents
Advertisement
Press the Rotary Switch (1) to leave the programming mode.
READYM
16. Maintenance
16.1 Filling in water
FILL
WATER
If this information is displayed, drawing off products is no
longer possible. Refill water as described in Chapter 2.3.
READY
The water tank should be rinsed daily and refilled with fresh
water. Only fill in fresh, cold water. Never fill in milk, mineral
water or other liquids.
16.2 Emptying the coffee grounds container
EMPTY
GROUNDS
If this message appears on the display, you can no longer draw
off coffee. You must empty the coffee grounds con tainer (18)
first (Fig. 13).
Carefully take out the drip tray (20), it is filled with water.
NO
TRAY
Insert the empty and clean trip tray (20) again.
READY
The red water level indicator appears when the drip tray (20) is
full.
16.3 Drip tray missing
NO
TRAY
If this information is displayed, the drip tray (20) is not installed
properly or was not installed at all.
Insert the drip tray (20).
READY
16.4 Fill coffee beans
FILL
BEANS
Refill beans as described in Chapter 2.4.
The message REFILL BEANS will disappear after you draw off
your next cup of coffee.
We recommend that you clean the bean tank regularly before
refilling beans, using a dry cloth. Before cleaning the tank,
switch off the IMPRESSA.
16.5 Replacing the filter
After drawing off 50 litres, the filter cartridge will be used up. A
message requesting you to replace the filter will appear on the
display.
Refer to Chapter 5.2 'Replacing the filter'.
E
23
Hide quick links:
Advertisement
Table of Contents
