Jura IMPRESSA F7 Instructions For Use Manual

Jura IMPRESSA F7 Instructions For Use Manual

Hide thumbs Also See for IMPRESSA F7:

Advertisement

IMPRESSA F7 Instructions for Use
The Instructions for use has been awarded the seal of
approval by the independent German Technical Inspection
Agency, TÜV SÜD, due to its easy-to-understand style, its
thoroughness and coverage of safety aspects.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IMPRESSA F7 and is the answer not in the manual?

Questions and answers

Summary of Contents for Jura IMPRESSA F7

  • Page 1 IMPRESSA F7 Instructions for Use The Instructions for use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
  • Page 2: Table Of Contents

    Important information Proper use ..............................6 For your safety ............................... 6 1 Preparing and using for the first time JURA on the Internet ............................10 Setting up the machine ..........................10 Filling the bean container ...........................10 First-time use ..............................10 Determining the water hardness ......................13 Adjusting the grinder ..........................14...
  • Page 3 8 Transport and environmentally friendly disposal Transport / Emptying the system ......................46 Disposal .................................46 9 Technical data 10 Index 11 JURA contact details / Legal information Symbol description Warnings Always take note of any information marked with the words CAUTION or J WARNING WARNING and a warning sign.
  • Page 4: Control Elements

    Control elements Control elements Bean container with aroma preservation Storage compartment cover cover Grinder adjustment switch Water tank cover Measuring spoon for ground coffee Height-adjustable hot-water nozzle Water tank Power switch and mains cable  Switch for hot water and steam (back of the machine) preparation Coffee grounds container...
  • Page 5 Control elements Top of the machine Front On/Off button Display g Rotary Switch Preparation buttons Maintenance button Ristretto button < Espresso button > Coffee button § Hot Water button Steam button * Cappuccino button The Connector System permits the use of different cappuccino frothers. These are available ©...
  • Page 6: Important Information

    JURA service. If the mains cable of this machine is damaged, it must be repaired either directly by JURA or by an authorised JURA service centre. Make sure that the IMPRESSA and the mains cable are not located close to hot surfaces.
  • Page 7 The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories. To completely and safely disconnect the...
  • Page 8 (see Chapter 9 ‘Technical data’). Please only use original JURA maintenance products. Use of products that are not explic- itly recommended by JURA could damage the IMPRESSA. Do not use any coffee beans treated with addi- tives or caramelised coffee beans.
  • Page 9 Important information People, including children, who do not have the physical, sensory or mental capabilities to use the machine safely or are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it cor- rectly.
  • Page 10: Preparing And Using For The First Time

    JURA on the Internet Visit us on the Internet. You can download short operating instruc- tions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your IMPRESSA and on every aspect of coffee.
  • Page 11: Fill Water Tank

    1 Preparing and using for the first time Precondition: The bean container has been filled. T  Insert the mains plug into a power socket.   3  T  Switch on the IMPRESSA using the power switch on the back of the machine.  ...
  • Page 12 1 Preparing and using for the first time T  Place a receptacle (at least 300  ml) under the fine foam frother and the coffee spout.   j  T  Turn the switch to the m position. , water flows out of the fine foam FILTER RINSING frother.
  • Page 13: Determining The Water Hardness

    1 Preparing and using for the first time T  Fill the water tank with fresh, cold water and reinsert the tank. SWITCH OPEN The arrow on the switch lights up. T  Place a receptacle under the fine foam frother and under the coffee spout.
  • Page 14: Adjusting The Grinder

    1 Preparing and using for the first time Adjusting the grinder You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee. CAUTION If you adjust the consistency of grind when the grinder is not oper- ating, the grinder adjustment switch could be damaged.
  • Page 15: Preparation

    – and impairs the taste. We therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialised dealer. You can make permanent settings for all products in programming mode (see Chapter 4 ‘Permanent settings in programming mode –...
  • Page 16: Two Speciality Coffees At The Touch Of A Button

    T  Place a cup under the coffee spout and the fine foam frother. (Figure: Optional JURA Cool Control Basic 0.6 l) E Ensure that the filling height of the milk is no higher than the milk pipe connection on the fine foam frother.
  • Page 17: Milk Foam

    T  Place a cup under the fine foam frother. (Figure: Optional JURA Cool Control Basic 0.6 l) E Ensure that the filling height of the milk is no higher than the milk pipe connection on the fine foam frother.
  • Page 18: Ground Coffee

    2 Preparation   j  T  Turn the switch to the m position. , the milk foam is prepared. Preparation stops auto- STEAM matically when the preset amount of steam is reached. SWITCH CLOSE   h  T  Turn the switch to the ° position. The illuminated arrow on the switch goes out.
  • Page 19: Permanently Setting The Amount Of Water For The Cup Size

    2 Preparation T  Open the cover of the filler funnel for ground coffee. FILL PRE-GROUND T  Place one level measuring spoon of ground coffee into the filler funnel. T  Close the cover of the filler funnel. SELECT BUTTON   <  T  Press the Espresso button. Preparation starts.
  • Page 20: Hot Water

    2 Preparation E You can also permanently set the amount of water for all spe- ciality coffees and hot water in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Prod- uct settings’). Hot water To obtain a perfect water flow, use the hot-water nozzle. You can find the hot-water nozzle under the cover of the storage compartment.
  • Page 21: Daily Operation

    3 Daily operation 3 Daily operation Switching on Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily. Precondition: Your IMPRESSA is switched on at the power switch.
  • Page 22: Switching Off

    3 Daily operation Switching off When the IMPRESSA is switched off, the system is automatically rinsed if a speciality coffee has been prepared. If cappuccino or milk foam has been prepared, the machine will also prompt you to rinse the cappuccino frother. Precondition: ...
  • Page 23: Permanent Settings In Programming Mode

    4 Permanent settings in programming mode 4 Permanent settings in programming mode You can make permanent settings in programming mode. You can navigate through the programme items and permanently save the required settings simply by turning and pressing the Rotary Switch. You can make the following settings with the Rotary Switch: Programme item Sub-item...
  • Page 24: Product Settings

    4 Permanent settings in programming mode Programme item Sub-item Explanation T Keep track of all products prepared and view INFO COUNTER the number of maintenance programmes CLEAN (only if filter performed and the maintenance status. DESCALE is not activated), (only if filter FILTER is activated), VERSION...
  • Page 25: Setting The Water Hardness

    4 Permanent settings in programming mode   g  T  Turn the Rotary Switch until is displayed. BUTTONS   k  T  Press the Rotary Switch to enter the programme item. SELECT BUTTON E Next select the button of the product for which you would like to make settings.
  • Page 26: Energy-Saving Mode

    4 Permanent settings in programming mode   k  T  Press the Rotary Switch to enter the programme item. 16 °dH   g  T  Turn the Rotary Switch until is displayed. 25 °dH   k  T  Press the Rotary Switch to confirm the setting. appears briefly on the display.
  • Page 27: Automatic Switch-Off

    4 Permanent settings in programming mode Automatic switch-off By instructing your IMPRESSA to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your IMPRESSA switches off automatically after the preset time fol- lowing the last action on the machine. You can set the automatic switch-off to 15 ...
  • Page 28: Restore Factory Settings

    4 Permanent settings in programming mode Precondition:  is displayed. READY   k  T  Press and hold the Rotary Switch until appears. RINSE   g  T  Turn the Rotary Switch until is displayed. RINSES   k  T  Press the Rotary Switch to enter the programme item. INIT RINSE  ...
  • Page 29: Querying Information

    4 Permanent settings in programming mode   k  T  Press the Rotary Switch to enter the programme item. PRODUCT   k  T  Press the Rotary Switch. SELECT BUTTON   <  T  Press the Espresso button. appears briefly on the display. PRODUCT  ...
  • Page 30: Unit For Amount Of Water

    4 Permanent settings in programming mode E The maintenance status can also be displayed in addition to the number of performed maintenance programmes. The bar shows the current maintenance status. When the bar is com- pletely filled, your IMPRESSA will request the respective main- tenance programme.
  • Page 31: Language

    4 Permanent settings in programming mode Language In the programme item you can select the language LANGUAGE used by your IMPRESSA. Example:  Proceed as follows to change the language from ENGLISH DEUTSCH Precondition:  is displayed. READY   k  T  Press and hold the Rotary Switch until appears.
  • Page 32: Maintenance

    5 Maintenance 5 Maintenance Your IMPRESSA has the following integrated maintenance pro- grammes: Rinsing the machine ( RINSE Rinsing the fine foam frother ( C RINSE Cleaning the fine foam frother ( C CLEANING Changing the filter ( FILTER Cleaning the machine ( CLEAN Descaling the machine ( ) (only if filter is not acti-...
  • Page 33: Rinsing The Fine Foam Frother

    If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T  Use only original JURA maintenance products. E JURA Cappuccino Cleaner is available from specialised dealers. Precondition:  is displayed.
  • Page 34: Dismantling And Rinsing The Fine Foam Frother

    5 Maintenance T  Remove the milk pipe from the milk container or carton. T  Pour 250 ml of fresh water into a receptacle and add one capful of Cappuccino Cleaner. T  Immerse the milk pipe in the receptacle. T  Place a receptacle under the fine foam frother.  ...
  • Page 35: Dismantling And Rinsing The Professional Fine Foam Frother

    T  Rinse all the parts of the professional fine foam frother thor- oughly under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in JURA Cappuccino Cleaner and then rinse them thoroughly. T  Re-assemble the professional fine foam frother.
  • Page 36: Inserting And Activating The Filter

    5 Maintenance Inserting and activating Your IMPRESSA no longer has to be descaled if you are using the the filter CLARIS Blue filter cartridge. If you did not activate the filter cartridge the first time you used the machine, you can do this now as follows. E Perform the ‘inserting the filter’...
  • Page 37: Changing The Filter

    5 Maintenance E You can interrupt rinsing of the filter at any time. To do this, turn the switch clockwise. Turn the switch anticlockwise to continue rinsing the filter. E The water may be slightly discoloured. This is not harmful to health and does not affect the taste.
  • Page 38: Cleaning The Machine

    E The cleaning programme lasts approximately 20 minutes. E Do not interrupt the cleaning programme. The quality of cleaning will be impaired if you do so. E JURA cleaning tablets are available from specialised dealers. Precondition:   / is displayed and the Maintenance...
  • Page 39: Descaling The Machine

    The operation is interrupted, ADD TABLET T  Open the cover of the filler funnel for ground coffee. T  Insert a JURA cleaning tablet into the filler funnel. T  Close the cover of the filler funnel. , the Maintenance button c lights up.
  • Page 40 AGENT IN TANK T  Remove and empty the water tank. T  Completely dissolve the contents of one blister (3 JURA des- caling tablets) in a receptacle holding 500 ml of water. This may take several minutes. T  Pour the solution into the empty water tank and insert it into the machine.
  • Page 41 5 Maintenance   h  T  Turn the switch to the ° position. , the descaling operation is continued. The DESCALING Maintenance button c flashes during the descaling opera- tion. The operation is interrupted, EMPTY TRAY T  Empty the drip tray and coffee grounds container and put them back into the machine.
  • Page 42: Cleaning The Bean Container

    5 Maintenance Cleaning the bean Coffee beans may be covered with a slight oil film which remains on container the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time.
  • Page 43: Display Messages

    6 Display messages 6 Display messages Message Cause/Result Action The water tank is empty. You T Fill the water tank (see Chapter 1 FILL WATER cannot prepare any products. TANK ‘Preparing and using for the first time – Filling the water tank’). The coffee grounds container is T Empty the coffee grounds container EMPTY...
  • Page 44: Troubleshooting

    Grinder is making a There are foreign objects in T Contact customer support in your very loud noise. the grinder. country (see Chapter 11 ‘JURA contact details / Legal information’).
  • Page 45 Contact customer support in displayed. your country (see Chapter 11 ‘JURA contact details / Legal information’). E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).
  • Page 46: Transport And Environmentally Friendly Disposal

    8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Transport / Emptying the Keep the packaging for your IMPRESSA. It should be used to protect system the machine during transport. In order to protect the IMPRESSA from frost during transport, the system must be emptied.
  • Page 47: Technical Data

    9 Technical data 9 Technical data Voltage 220–240 V ~, 50 Hz Power 1450 W Conformity mark Energy consumption approx. 6 Wh ENERGY w Energy consumption approx. 13 Wh ENERGY - Pump pressure Static, max. 15 bar Holding capacity of water tank 1.9 l Holding capacity of bean container 310 g Holding capacity of coffee grounds Max.
  • Page 48 10 Index 10 Index Contact details 52 Cover Addresses 52 Filler funnel for ground coffee 4 Aroma preservation cover Storage compartment 4 Bean container with aroma preservation Water tank 4 cover 4 Cup grille 4 Automatic switch-off 27 Customer support 52 Bean container Descaling Bean container with aroma preservation...
  • Page 49 Problems Ground coffee 18 Troubleshooting 44 Internet 10 Product settings 24 Professional fine foam frother Dismantling and rinsing 35 JURA Programming mode 23 Contact details 52 Automatic switch-off 27 Internet 10 Cappuccino frother rinsing 27 Energy-saving mode 26 Language 31...
  • Page 50 10 Index Safety 6 Safety information 6 Settings Permanent settings in programming mode 23 Setting up Setting up the machine 10 Short operating instructions 10 Switch for hot water and steam preparation Switching off Machine 22 Switching on Machine 21 Switch-off Automatic switch-off 27 Switch-on rinse 27...
  • Page 52: Jura Contact Details / Legal Information

    Art. 70554/F7/en/201308 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233 @ You will find additional contact details for your country at www.jura.com. Directives The machine complies with the following directives: 2006/95/EC –...

This manual is also suitable for:

Impressa f

Table of Contents