Programming Temperature; Programming Amount Of Water; Programming Machine On; Programming Amount Of Milk - Jura IMPRESSA X7-S Instructions For Use Manual

15.2 Programming Temperature

: ADJUST TEMPERATURE / SELECT PRODUCT
Press the required draw-off key.
: (selected product)
STAND. TEMP.
Select the required temperature with the keys
standart)
To store, press the key PROG.
: ADJUST TEMPERATURE / SELECT PRODUCT
Press the required draw-off key, the key
next phase or the key EXIT to quit the programming.

15.3 Programming amount of water

: ADJUST WATER QUANTITY / SELECT PRODUCT
Press the required draw-off key.
: (selected product)
WATER 90 ML
You can change the value by pressing the key
To store, press the key PROG.
: ADJUST WATER QUANTITY / SELECT PRODUCT
Press the required draw-off key, the key
next phase or the key EXIT to quit the programming.

15.4 Programming amount of milk

: ADJUST MILK QUANTITY / SELECT PRODUCT
Press the key or
: (selected product)
10 SEC.
You can alter the time by pressing the keys
time from 3 – 60 sec.)
To store, press the key PROG.
: ADJUST MILK QUANTITY / SELECT PRODUCT
Press the required draw-off key, the key
next phase or the key EXIT to quit the programming.

15.5 Programming portion of hot water

Place a cup under the pivoting nozzle (18).
: HOT WATER PORTION / PRESS FOR HOT WATER
: ENOUGH HOT WATER ? / PRESS FOR HOT WATER
: HOT WATER PORTION / PRESS FOR HOT WATER
+
Press the key in order to reach the next phase or the key EXIT
to quit the programming.

15.6 Programming water hardness

: WATER HARDNESS
LEVEL 3
Press the key PROG.
You can set the water hardness by pressing the keys
To store, press the key PROG.
10
+
-
or (high or
15.7 Programming CLOCK
Programming the clock is necessary if the function "Machine on" is
used.
+
in order to reach the
+
-
or .

15.8 Programming machine on

Programming the clock is necessary if the function "Machine on" is
+
in order to reach the
used.
+
-
or (draw-off
+
in order to reach the

15.9 Programming machine off

15.10 Draw-offs
+
-
or .
+
Press the key in order to reach the next phase or the key EXIT
to quit the programming.
To determine the water hardness, please read Chapter 8
"Setting the water hardness"
: TIME.
—:—
Press the key PROG.
+ -
By pressing the keys or
To store, press the key PROG.
+
-
By pressing the keys or
To store, press the key PROG.
+
Press the key in order to reach the next phase or the key EXIT
to quit the programming.
: UNIT
ON —:—
Press the key PROG.
+
-
By pressing the keys or
To store, press the key PROG.
+ -
By pressing the keys or
To store, press the key PROG.
+
Press the key in order to reach the next phase or the key EXIT
to quit the programming.
The display —:— means that the function is switched off.
: UNIT OFF
5.0 HRS.
Press the key PROG.
+
-
By pressing the keys or
or 0.5 hrs. – 9 hrs.).
To store, press the key PROG.
+
Press the key in order to reach the next phase or the key EXIT
to quit the programming.
: AUDIT TRAIL (total audit trail)
Press the required draw-off key to inquire the draw-offs.
+
Press the key in order to reach the next phase or the key EXIT
to quit the programming.
Draw-offs of steam cannot be inquired.
you can set the hours.
you can set the minutes.
you can set the hours.
you can set the minutes.
you can set the hours (switched off