Programming The Aroma Intensive Or Standard; Programming The Temperature; Programming The Water Quantity - Jura Impressa F90 Instructions For Use Manual

12.3 Programming the aroma INTENSIVE or
STANDARD
The aroma for the powder quantities (
adjusted to Intensive in the factory. If requested it can also
be set to Standard.
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
Press programming key
Touch symbol until the following message is displayed:
AROMA INTENSIVE
Press symbol , you will hear an acoustic signal, IN-
TENSIVE flashes.
Use the symbols to adjust the aroma to STANDARD.
Press symbol to confirm the new settings.
AROMA STANDARD
Use the symbols to reach the next programming stage or
press programming key

12.4 Programming the temperature

Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
/ / ) was
until you hear an acoustic signal.
to quit Programming Mode.
Press programming key
Touch symbol until the following message is displayed:
TEMP. HIGH
Press symbol , you will hear an acoustic signal and HIGH
flashes.
Use the symbol to adjust the temperature to NORMAL.
Press symbol to confirm your settings.
TEMP. NORMAL
Use the symbols to reach the next programming stage or
press programming key

12.5 Programming the water quantity

Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
Press programming key
Press symbol until the following message is displayed:
WATER QUANTITY
Press symbol .
SELECT PRODUCT
Select the product, the water quantity of which you want to
programme ( / / )
COFFEE 90 ML
Press symbol , the value flashes.
Use symbols to change the value in 5 ml increments.
Press symbol to save the water quantity for this product.
until you hear an acoustic signal.
to quit Programming Mode.
until you hear an acoustic signal.
E
13