Decalcifying Without Display Request; Disposal - Jura IMPRESSA F70 Instructions For Use Manual

Insert the tray (20) again.
FILL
WATER
Rinse the water tank thoroughly and fill it with cold, fresh tap
water. Install it again.
OPEN
TAP
Open the steam / hot water draw-off tap (14) (Fig. 12).
DE-SCALING
CLOSE TAP
After you have closed the steam / hot water draw off tap (14), the
following message is displayed
DE-SCALING
EMPTY
TRAY
Empty the tray (20).
NO
TRAY
Insert the tray (20) again.
PRESS
MAINT.
Touch the symbol (7).
RINSING
READY
The descaling operation was completed successfully.

18.1 Decalcifying without display request

Decalcifying without display request is only possible if the
CLARIS plus filter is NOT programmed.
Press the Rotary Switch (1) until
FILTER – appears.
Turn the Rotary Switch (1) until
MAINTENANCE appears.
Press the Rotary Switch (1) to confirm.
RINSE
Turn the Rotary Switch (1) until
DECALC. ON appears.
Press the Rotary Switch (1) again to confirm.
EMPTY TRAY
The program 'De-scale' is now active. Now proceed as described in
Chapter 18 from EMPTY TRAY onwards.

19. Disposal

Please dispose of old machines in an environmentally
neutral way.
Old machines contain valuable materials capable of being
recycled which should be salvaged for recycling. Please
therefore dispose of old machines via suitable collection
systems.
E
27