Programming; Programming The Filter; Programming The Water Hardness; Maintenance Menu - Jura IMPRESSA F70 Instructions For Use Manual

15. Programming

When your IMPRESSA leaves the factory it is adjusted such that
you can draw off coffee without having to change any settings.
However, you can programme various para meters individually.
You can programme the following stages:
Filter
Water hardness
Maintenance
Aroma
Temperature
Time
Automatic switch-on time
Automatic switch-off time
Draw-offs
Language
Display
Exit
To start programming, press the Rotary Switch (1) until
FILTER – / appears
Rotary switch
Turn the Rotary Switch to change the adjusted values or to
select the next programming step.
Press the Rotary Switch to check the values adjusted or to save
the values selected (Fig. 17).

15.1 Programming the filter

Refer to Chapter 5.1 'Inserting the filter'.
18

15.2 Programming the water hardness

Refer to Chapter 4 'Adjusting the water hardness'.

15.3 Maintenance menu

READY
Press the Rotary Switch (1) until
FILTER – / appears
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until
MAINTENANCE appears
Press the Rotary Switch (1)
RINSE
Turn the Rotary Switch (1) until the required program item appears
on the display (9).
e.g. RINSE, CLEAN, FILTER, DE-SCALE or EXIT
e.g. CLEAN
Press the Rotary Switch (1)
The cleaning program starts.
EMPTY TRAY
Continue with Chapter 17 Cleaning, from point 3
EMPTY TRAY
15.4 Programming the aroma INTENSIVE
or STANDARD
When the machine leaves the factory, the aroma is set to
intensive. If requested it can also be set to Standard.