Programming The Aroma Robust Or Standard; Programming The Temperature - Jura IMPRESSA F50 Classic Instructions For Use Manual

4 Permanent settings in programming mode
Programming the aroma
ROBUST or STANDARD
Programming the
temperature
J WARNING
24
E When the machine leaves the factory, the aroma is set to
robust. If requested it can also be set to Standard.
READY
T Press programming key O (4) until
The illuminated ring (2) is active.
T Turn the Rotary Switch (1) until
AROMA
T Press the Rotary Switch (1).
ROBUST
T Turn the Rotary Switch (1) until the following message is dis-
played:
STANDARD
T To confirm the new aroma settings, press the Rotary
Switch (1).
AROMA
T Press the programming key O (4) to quit the programming
mode or select the next programming item using the Rotary
Switch (1).
READY
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
READY
T Press programming key O (4) until
The illuminated ring (2) is active.
T Turn the Rotary Switch (1) until
played.
TEMPERATURE
T Press the Rotary Switch (1).
HIGH
appears.
FILTER
is displayed.
AROMA
.
appears.
FILTER
TEMPERATURE
is dis-