Switching Off Machine; Programming; Programming Powder Quantity; Programming Coffee Temperature - Jura IMPRESSA S70 Instructions For Use Manual

When steam is first drawn off, there is a possibility of spat-
tering. The pivoting nozzle becomes hot. Avoid direct
contact with the skin.

11. Switching off machine

When the machine is switched off, the rinsing program is auto-
matically run again. Therefore place an empty container under the
coffee-spout (15) and press ON/OFF key
water has run into the container, the machine powers down.
Discard the water.

12. Programming

Before leaving our factory, the machine is adjusted to enable you
to obtain coffee without any additional programming. In order to
adapt the result to your personal taste, various settings can be pro-
grammed individually. The programming keys are located behind
the front cover (3).
The following settings can be programmed:
Powder quantity
Brewing temperature
Water quantity
Filter
Water hardness
Economy mode
Timer clock
Automatic switch on time
Automatic switch off time
Supplies and cup counter
Language selection

12.1 Programming POWDER QUANTITY

Switch the machine on by pressing ON/OFF key
Press key until you can hear an acoustic signal.
P
12
Now press the key that you want to programme. Use the key for
1 cup only. The corresponding quantity for 2 cups is adjusted
automatically by the machine after programming is finished.
The powder quantity can be selected by pressing keys
. When the rinsing
briefly.
To store the new powder quantity in memory briefly press
key
You can go to the next setting by pressing key

12.2 Programming coffee temperature

Now press the key that you want to programme.
Select the required temperature (high or normal) by activating
key
To store the new coffee temperature in memory briefly press
key
You can call up the next setting by pressing key

12.3 Programming water quantity

Put a cup under the coffee-spout (15) and then press the key that
you want to programme.
Now your machine prepares a coffee.
.
POWDER QUANTITY / SELECT KEY
POWDER
– ··········II·········· +
.
P
POWDER QUANTITY / SELECT KEY.
TEMPERATURE COFFEE / SELECT KEY
+
-
or .
.
P
TEMPERATURE COFFEE / SELECT KEY
WATER QUANTITY / SELECT KEY
The selected value is confirmed
ENOUGH COFFEE / PRESS KEY
– ··········II·········· +
OK?
P
+
-
or
+
.
+
.
P