Page 1
JURA F9 Instructions for Use The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
Important information Proper use ..............................6 For your safety ............................... 6 1 Preparing and using for the first time JURA on the Internet ............................10 Setting up the machine ..........................10 Filling the bean container ...........................10 First-time use ..............................10 Determining the water hardness ......................13 Connecting milk ............................14...
Page 3
CAUTION draws your attention to potential damage to the machine. Symbols used Prompt to take action. This symbol means that you are being prompted to perform some action. Information and tips to make it even easier to use your JURA F9. ‘Espresso’ Display...
Control elements Control elements Bean container with aroma preservation Filler funnel cover cover Filler funnel for ground coffee Water tank cover Storage compartment cover Water tank Grinder adjustment switch Power switch and mains cable Measuring spoon for ground coffee (back of the machine) Hot-water spout Coffee grounds container Height-adjustable dual spout...
Page 5
Control elements Top of the machine Front On/Off button Display g Rotary Switch Multi-function buttons (button function P button (programming) depends on what is shown in the display) l Switch for hot water preparation...
JURA or by an authorised JURA service centre. Make sure that the JURA F9 and the mains cable are not located close to hot surfaces. Be careful to ensure that the mains cable is not...
Page 7
Do not immerse the JURA F9, mains cable or connections in water. Do not put the JURA F9 or any individual parts in the dishwasher. Switch your JURA F9 off at the power switch before any cleaning operation.
Page 8
JURA F9. Further technical data is provided in these instructions for use (see Chapter 9 ‘Technical data’). Connect the JURA F9 directly to a domestic power socket. Using multi-socket adapters or extension cords may cause overheating. Please only use original JURA maintenance products.
Page 9
Important information People, including children, who do not have the physical, sensory or mental capabilities to use the machine safely or are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it cor- rectly.
First-time use When using the machine for the first time, you can choose whether you want to operate JURA F9 with or without the CLARIS Blue filter cartridge. If the water hardness is 10 °dH or more, we recommend using the filter cartridge. If you do not know the hardness of your water, you can find this out first (see Chapter 1 ‘Preparing and using...
Precondition: The bean container has been filled. T Insert the mains plug into a power socket. 3 T Switch on the JURA F9 using the power switch on the back of the machine. Q T Press the On/Off button to switch the JURA F9 on.
Page 12
‘Machine is rinsing’, the system is rinsed. The rinse stops automatically. ‘Please select product’ appears on the display. Your JURA F9 is ready for use. E The display shows the products you can prepare. First-time use without filter cartridge activation CAUTION Milk, sparkling mineral water or other liquids can damage the water tank or the machine.
‘Please select product’ appears on the display. Your JURA F9 is ready for use. E The display shows the products you can prepare. Determining the water You can find out what the water hardness is by using the Aquadur®...
1 Preparing and using for the first time Connecting milk Your JURA F9 creates fine, creamy, feather-light milk foam with a perfect consistency. The most important requirement for frothing milk is a milk temperature of 4–8 °C. We would therefore recom- mend using a milk cooler or a vacuum milk container.
(see Chapter 4 ‘Permanent settings in programming mode – Adjusting the product settings’). Ways of preparing a The JURA F9 offers various ways of preparing a speciality coffee, milk beverage foam or hot water: Preparation using the start screen: Simply press the corre- sponding preparation button for the product shown on the display (start screen) that you want.
2 Preparation The following additional products are shown in the product selector view: ‘Ristretto’ ‘2 ristretti’ ‘2 espressi’ ‘2 coffees’ ‘Special’ ‘Cappuccino’ ‘Macchiato’ ‘Caffè latte’ ‘Portion milk foam’ E The product selector view disappears automatically after 10 seconds if no preparation is started. E You have the option of replacing the four products on the start screen with your personal favourites (see Chapter 4 ‘Perma- nent settings in programming mode –...
Preparation stops automatically. Your JURA F9 is once more ready for use. Latte macchiato, Your JURA F9 prepares latte macchiato, cappuccino, flat white and cappuccino and other other speciality coffees with milk at the touch of a button. There is speciality coffees with no need to move the glass or cup.
E The desired speciality coffee must be prepared within approx- imately one minute after filling with the ground coffee. Oth- erwise the JURA F9 stops the operation and is once more ready for use. All speciality coffees with ground coffee are always prepared follow- ing the same model.
2 Preparation Permanently setting the It is easy to permanently adjust the amount of water for all single amount of water for the products to the cup size. Adjust the amount once as shown in the cup size following example. Every time you prepare a drink in the future, this amount will be dispensed.
2 Preparation Adjusting the grinder You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee. CAUTION If you adjust the consistency of grind when the grinder is not oper- ating, the grinder adjustment switch could be damaged. T ...
You should therefore change the water daily. Precondition: Your JURA F9 is switched on at the power switch. T Place a receptacle under the dual spout. Q T Press the On/Off button to switch the JURA F9 on. ‘Welcome to JURA’ ‘Machine is heating’...
The operation stops automatically. Your JURA F9 is switched off. E When the JURA F9 is switched off with the On/Off button, the machine consumes less than 0.1 W of standby energy. The machine can be completely disconnected from the power...
‘Choose language’, T Select your language. (‘4/7’) ‘Switch off after’, T Set the time after which the JURA F9 ‘Save energy’, should switch off automatically. ‘Factory setting’ T Select an energy-saving mode. T Reset the machine to its factory setting.
4 Permanent settings in programming mode Product settings In the programme item ‘Product settings’ (‘3/7’) you can make the following settings: ‘Expert mode’ Set individual settings for all speciality coffees, milk and hot water (see Chapter 4 ‘Permanent settings in programming mode –...
4 Permanent settings in programming mode Permanent settings in programming mode always follow the same model. Example: Proceed as follows to change the coffee strength for one coffee. Precondition: ‘Please select product’ is displayed. O T Press the P button. ‘Maintenance status’ (‘1/7’) ...
4 Permanent settings in programming mode T Press the ‘Expert mode’ button. ‘Expert mode’ T Press the ‘ > ’ button (bottom right) several times until ‘Macchiato’ is displayed. T Press the ‘Macchiato’ button. ‘Macchiato’ g T Press the ‘ > ’...
O T Press the P button to exit programming mode. ‘Please select product’ Automatic switch-off By instructing your JURA F9 to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your JURA F9 switches off automatically after the preset time follow- ing the last action on the machine.
E If you are using the CLARIS Blue filter cartridge and have acti- hardness vated it, it is not possible to set the water hardness. The harder the water is, the more frequently the JURA F9 needs to be descaled. It is therefore important to set the water hardness accu- rately.
4 Permanent settings in programming mode O T Press the P button to exit programming mode. ‘Please select product’ Display settings In the programme item ‘Machine settings’ (‘5/7’) / ‘Display’ you can set the display brightness and contrast (as a percentage). Precondition: ‘Please select product’...
‘Factory setting’ the machine can be reset to its factory setting: All user settings (apart from the ‘filter’ and ‘water hardness’) are reset to factory set- tings. Your JURA F9 then switches off. Precondition: ‘Please select product’ is displayed. O T Press the P button.
4 Permanent settings in programming mode Querying information In the programme item ‘Information’ (‘7/7’) you can view the follow- ing information: ‘Product counter’: Number of prepared speciality coffees, speciality coffees with milk and hot water ‘Maintenance counter’: Number of maintenance programmes performed (cleaning, descaling etc.) ‘Version’: Software version Example: Proceed as follows to view the number of speciality cof-...
By referring to the bar you can see which maintenance programme is due. When the bar is completely filled with red, your JURA F9 will prompt you to perform the appropriate maintenance programme. E In the interests of hygiene, you should clean the milk system daily when you have been preparing milk.
5 Maintenance Rinsing the milk system After each milk preparation, the JURA F9 prompts you to perform a milk system rinsing. Precondition: ‘Rinse the milk system’ is displayed. T Place a receptacle under the dual spout. k T Press the Rotary Switch.
The operation stops automatically. ‘Milk system cleaning complete’ appears briefly on the display. Your JURA F9 is once more ready for use. Dismantling and rinsing The dual spout must be dismantled and rinsed daily if milk has been the dual spout prepared to make sure it functions perfectly and also in the interests of hygiene.
T Fit the dual spout on the machine. It will click into place audi- bly. Inserting and activating Your JURA F9 no longer has to be descaled if you are using the the filter CLARIS Blue filter cartridge. If you did not activate the filter cartridge the first time you used the machine, you can do this now as follows.
‘Please select product’ appears on the display. The filter is now activated. Changing the filter E After 50 litres of water have flowed through, the filter will cease to work. Your JURA F9 will automatically prompt you to change the filter.
Page 38
5 Maintenance E After two months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank. E If the CLARIS Blue filter cartridge is not activated in program- ming mode, you will not be prompted to change the filter. E CLARIS filter cartridges are available from specialised dealers.
5 Maintenance Cleaning the machine After 200 preparations or 80 switch-on rinses, the JURA F9 will prompt you to clean it. CAUTION If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.
Cleaning is now complete. Descaling the machine The JURA F9 builds up deposits of limescale over time and automat- ically prompts you to descale it when necessary. The degree of cal- cification depends on the hardness of your water.
Page 41
‘Agent in tank’ T Remove and empty the water tank. T Completely dissolve the contents of one blister (3 JURA des- caling tablets) in a receptacle holding 500 ml of lukewarm water. This may take several minutes.
T Remove the water tank. T If you use a CLARIS Blue filter cartridge, remove this. T Completely fill the water tank and dissolve 3 JURA descaling tablets in it. T Leave the water tank with the descaling solution for several hours (e.g.
T Replace the CLARIS Blue filter cartridge works. (see Chapter 5 ‘Maintenance – Changing the filter’). ‘Clean machine’ The JURA F9 is prompting you to T Perform cleaning (see Chapter 5 clean it. ‘Maintenance – Cleaning the machine’). ‘Decalcify The JURA F9 is prompting you to T Perform descaling (see Chapter 5 machine’...
Other ‘Error’ messages – T Switch the JURA F9 off at the power are displayed. switch. Contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’). E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 ‘JURA contact details /...
8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Transport / Emptying the Keep the packaging for your JURA F9. It should be used to protect system the machine during transport. In order to protect the JURA F9 from frost during transport, the sys- tem must be emptied.
9 Technical data 9 Technical data Voltage 220–240 V ~, 50 Hz Power 1450 W Conformity mark Energy consumption approx. 5 Wh ‘Save energy’ ‘Active’ Energy consumption approx. 16 Wh ‘Save energy’ ‘Inactive’ Pump pressure static, max. 15 bar Holding capacity of water tank 1.9 l Holding capacity of bean container 310 g Holding capacity of coffee grounds max.
J71806/F9/en/201407 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233 @ You will find additional contact details for your country at www.jura.com. Directives The machine complies with the following directives: 2006/95/EC –...
Need help?
Do you have a question about the F9 and is the answer not in the manual?
Questions and answers