Programming The Filter; Programming Your Machine To The Correct Water Hardness (Only With Filter No); Maintenance; Programming The Temperature For Coffee, Espresso, Cappuccino And Special Coffee - Jura IMPRESSA X5 Instructions For Use Manual

Information
Rename
Language
Display

15.1 Programming the filter

Please refer to Chapter 5 "Using the CLARIS plus filter cartridge".
15.2 Programming your machine to the correct
water hardness (only with FILTER NO)
Please refer to Chapter 4 "Adjusting your machine to the water
hardness".

15.3 Maintenance

You can activate the following maintenance functions from this
program item:
RINSING MACHINE, CLEAN CAPPUCCINO,
CHANGE FILTER, CLEAN UNIT, RINSE CAPPUCCINO,
DECALCIFY MACHINE.
"DECALCIFY MACHINE" is not displayed if you are using a
CLARIS plus filter and the filter is set to "Yes".
"CHANGE FILTER" is not displayed if you are not using a
CLARIS plus filter and the filter is set to "No".
COFFEE READY
Press the Rotary Switch (B) until you hear an acoustic signal.
FILTER
NO or YES
Turn the Rotary Switch (B) until the following message is dis-
played:
20
MAINTENANCE
Press the Rotary Switch (B) to start programming.
RINSE UNIT
Turn the Rotary Switch (B) until the required maintenance func-
tion (for selection see above) is displayed. Press the Rotary
Switch (B) to activate the function.
15.4 Programming the temperature for coffee,
espresso, cappuccino and special coffee
You can adjust the temperature for each type of coffee sepa-
rately. The temperature can be set to 3 different levels
(LOW, NORMAL, HIGH).
COFFEE READY
Press the Rotary Switch (B) until you hear an acoustic signal.
FILTER
NO or YES
Turn the Rotary Switch (B) until the following message is dis-
played:
TEMPERATURE
Press the Rotary Switch (B) to start programming.
TEMPERATURE
COFFEE READY
Then press a product key of your choice.
1 ESPRESSO (example)
NORMAL