Programming The Aroma Intensive Or Standard; Programming The Temperature; Programming The Time - Jura Impressa xf70 Instructions For Use Manual

Press the Rotary Switch (1)
RINSE
Turn the Rotary Switch (1) until the required program item ap-
pears on the display (9).
e.g. RINSE, CLEAN, FILTER, DE-SCALE or EXIT
e.g. CLEAN
Press the Rotary Switch (1)
The cleaning program starts.
EMPTY TRAY
Continue with Chapter 17 Cleaning, from point 3
EMPTY TRAY
15.4 Programming the aroma INTENSIVE
or STANDARD
When the machine leaves the factory, the aroma is set to
intensive. If requested it can also be set to Standard.
READY
Press the Rotary Switch (1) until
FILTER – / appears
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until Aroma is displayed.
AROMA
Press the Rotary Switch (1).
INTENSIVE
Turn the Rotary Switch (1) until the following message is dis-
played:
STANDARD
Press the Rotary Switch (1) to save the setting.
AROMA
16
Turn the Rotary Switch (1) until
EXIT appears
Press the Rotary Switch (1) to leave the programming mode.
READY

15.5 Programming the temperature

READY
Press the Rotary Switch (1) until
FILTER – / appears
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until Temperature is displayed.
TEMPERATURE
Press the Rotary Switch (1).
HIGH
Turn the Rotary Switch (1) to change the temperature from
HIGH to NORMAL (or vice versa).
NORMAL
Press the Rotary Switch (1) to save the setting.
TEMPERATURE
Turn the Rotary Switch (1) until
EXIT appears
Press the Rotary Switch (1) to leave the programming mode.
READY

15.6 Programming the time

You must programme the time if you want to use the auto-
matic switch-on function.
READY
Press the Rotary Switch (1) until
FILTER – / appears