Advertisement

F9 – Quick Reference Guide

Advertisement

Table of Contents
loading

Summary of Contents for Jura F9

  • Page 1 F9 – Quick Reference Guide...
  • Page 2: Rinsing The Machine

    The rinse stops automatically. ‘Please select product’ appears on the display. Rinsing the milk system After each milk preparation, the JURA F9 prompts you to perform a milk system rinsing. Precondition: ‘Rinse the milk system’ is displayed.
  • Page 3: Cleaning The Milk System

    If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. Use only original JURA maintenance products. E JURA milk system cleaner is available from specialised dealers. Precondition: ‘Please select product’...
  • Page 4: Dismantling And Rinsing The Dual Spout

    T Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.
  • Page 5: Inserting And Activating The Filter

    T Fit the dual spout on the machine. It will click into place audibly. Inserting and activating Your JURA F9 no longer has to be descaled if you are using the the filter CLARIS Blue filter cartridge. If you did not activate the filter cartridge the first time you used the machine, you can do this now as follows.
  • Page 6: Changing The Filter

    Changing the filter E After 50 litres of water have flowed through, the filter will cease to work. Your JURA F9 will automatically prompt you to change the filter. E After two months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank.
  • Page 7 F9 – Quick Reference Guide T Press the ‘Change the filter’ button. ‘Change the filter’ T Press the ‘Start’ button. T Press the ‘Start’ button again. ‘Change filter’ T Remove and empty the water tank. T Open the filter holder and remove the old CLARIS Blue filter cartridge.
  • Page 8: Cleaning The Machine

    F9 – Quick Reference Guide Cleaning the machine After 200 preparations or 80 switch-on rinses, the JURA F9 will prompt you to clean it. CAUTION If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.
  • Page 9: Descaling The Machine

    Cleaning is now complete. Descaling the machine The JURA F9 builds up deposits of limescale over time and automa- tically prompts you to descale it when necessary. The degree of cal- cification depends on the hardness of your water.
  • Page 10 ‘Agent in tank’ T Remove and empty the water tank. T Completely dissolve the contents of one blister (3 JURA des- caling tablets) in a receptacle holding 500 ml of lukewarm water. This may take several minutes.
  • Page 11 F9_Kurz/en/201412 F9 – Quick Reference Guide T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Please select product’ appears on the display. Descaling is now complete. E If the descaling operation stops unexpectedly, rinse the water...

Table of Contents