Cleaning The Professional Cappuccino Frother; Switching Off The Impressa - Jura IMPRESSA F70 Instructions For Use Manual

Thoroughly rinse all parts of the nozzle under running water.
Reassemble the Professional Cappuccino Frother (15) and refit it on
to your IMPRESSA.

13.4 Cleaning the Professional Cappuccino Frother

To ensure that the Professional Cappuccino Frother (15) func-
tions perfectly, you should clean it daily if you have prepared
milk foam or hot milk.
You will not be prompted by your IMPRESSA to clean the Pro-
fessional Cappuccino Frother (15).
You can obtain the JURA Auto-Cappuccino Cleaner from the
specialist shop.
Place a receptacle under the Professional Cappuccino Frother (15)
(Fig. 9).
Fill a second receptacle with 2.5 dl of fresh water and add one cap-
ful of the Auto-Cappuccino Cleaner.
Dip the milk pipe into the second receptacle with the Auto-
Cappuccino Cleaner (Fig. 9).
Turn the selector switch of the Professional Cappuccino Frother (15)
to the milk position (Fig. 21) or to the milk foam position (Fig. 19).
READY
Open the steam / hot water draw-off tap (14) (Fig. 12).
Draw steam until the receptacle with the Auto-Cappuccino Cleaner
is empty.
This procedure cleans the Professional Cappuccino Frother and the
milk pipe.
Close the steam / hot water draw-off tap (14).
READY
Before CLOSE TAP water may still escape the system.
Fill the receptacle with 2.5 dl of fresh water.
Dip the milk pipe into the receptacle with the fresh water.
Open the tap for dispensing steam/hot water (14) (Fig. 12) in order
to draw steam.
Draw steam until the receptacle with the fresh water is empty.
This procedure rinses the Professional Cappuccino Frother (15) and
the milk pipe with fresh water.
Cleaning of the Professional Cappuccino Frother (15) is now com-
plete, your IMPRESSA is ready for use.

14. Switching off the IMPRESSA

In order to ensure perfect operation, please don't switch off
your IMPRESSA at the power switch (24) before all the symbols
on the display (9) have gone off except for
READY
Switch off the IMPRESSA using the ON/OFF key
RINSING
An automatic rinsing operation is started.
Your IMPRESSA is in standby mode.
E
(3).
(3).
17