Programming; Programming Powder Quantity; Programming Coffee Temperature; Programming Water Quantity - Jura IMPRESSA X90 Instructions For Use Manual

13. Programming

Before leaving our factory, the machine is adjusted to enable you
to obtain coffee without any additional programming. In order to
adapt the result to your personal taste, various settings can be pro-
grammed individually. The programming keys are located behind
the front cover (3).
The following settings can be programmed:
Powder quantity
Coffee temperature
Water quantity
Steam portion
Tea portion
Filter
Water hardness
Economy mode
Timer clock
Automatic switch on time
Automatic switch off time
Supplies and cup counter
Language selection

13.1 Programming powder quantity

Switch the machine on by pressing ON/OFF key
Press key until you can hear an acoustic signal.
P
POWDER QUANTITY / SELECT KEY
Now press the key that you want to programme. Use the key for
1 cup only. The corresponding quantity for 2 cups is adjusted
automatically by the machine after programming is finished.
POWDER
·········· II ··········
-
The powder quantity can be selected by pressing keys
briefly.
.
+
+ or
-
To store the new powder quantity in memory briefly press key
POWDER QUANTITY / SELECT KEY.
By pressing the button, you can select the next phase, or
+
press the button in order to leave the programming.
N

13.2 Programming coffee temperature

TEMPERATURE COFFEE / SELECT KEY
Now press the key that you want to programme.
Select the required temperature (high or normal) by activating
key or .
+
-
To store the new coffee temperature in memory briefly press key
.
P
TEMPERATURE COFFEE / SELECT KEY
By pressing the + button, you can select the next phase, or
press the button in order to leave the programming.
N

13.3 Programming water quantity

WATER QUANTITY / SELECT KEY
Put a cup under the coffee-spout (15) and then press the key that
you want to programme.
The selected value is confirmed
Now your machine prepares a coffee.
ENOUGH COFFEE? / PRESS KEY
OK? ·········· II ··········
-
P
When the required water quantity is reached press key
can call up the next setting by pressing key
There is an additional possibility to alter the water quantity
anew. Press key or for this purpose.
+ -
If you wish to draw another coffee to control the water quantity,
press key again otherwise press key
quantity in memory.
.
P
P
+
. You
P
+ .
briefly to store water
P
13
E