Jura IMPRESSA XF70 Short Operating Instructions
Jura coffeemaker impressa operating instructions
Hide thumbs
Also See for IMPRESSA XF70:
- Instructions for use manual (32 pages) ,
- Instructions for use manual (27 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Jura IMPRESSA XF70
Summary of Contents for Jura IMPRESSA XF70
- Page 1 IMPRESSA X Short operating instructions...
-
Page 2: Control Elements
Control elements Rotary Switch Control elements 1. Rotary Switch 2. Illuminated ring 3. ON/OFF key 4. Programming key 5. Draw-off key 1 cup 6. Draw-off key 2 cups 7. Maintenance key 8. Steam pre-selection key 9. Display dialog system 10. Water tank with carrying handle 11. -
Page 3: First Use
First use Press power switch (I) (on rear) Fill bean tank Touch symbol Display text: SPRACHE - DEUTSCH Turn the Rotary Switch until the required language is displayed Confirm selected language by pressing the Rotary Switch Lift out water tank Fill water tank and place back into the machine Display text: OPEN TAP... -
Page 4: Changing The Filter
Cleaning (duration: approx. 15 minutes) Display text: READY - CLEAN Touch the maintenance symbol EMPTY - TRAY Empty drip and grounds tray and place back into the machine Remove drip tray Place a receptacle (ca. 1 litre) under the coffee spout Touch the maintenance symbol Drop an original JURA cleaning tablet into the filler funnel for ground coffee when display prompts you to do so... - Page 5 Decalcifying (duration: approx. 40 minutes) Display text: READY - DECALCIFY Touch symbol to switch machine off Touch maintenance symbol EMPTY - TRAY Empty drip and grounds tray and place back into machine Remove 2-stage frothing jet or hot water nozzle Remove water tank and empty it Completely dissolve contents of a blister (3 tablets) in 0.6 litres of water...
- Page 6 Cleaning the 2-stage frothing jet TIP: To ensure perfect operation of the 2-stage frothing jet, we recommend you clean it regularly. Hold the nozzle at the top and at the bottom end or use a 7 mm open-ended spanner Screw the nozzle apart Thoroughly rinse the 3 parts under running water NOTE: The display will not prompt you to clean the 2-stage frothing jet...