Programming The Temperature; Programming The Time - Jura IMPRESSA XF50 Instructions For Use Manual

READY
Press programming key
FILTER appears.
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until Aroma is displayed.
AROMA
Press the Rotary Switch (1).
ROBUST
Turn the Rotary Switch (1) until the following message is dis-
played:
STANDARD
To confirm the new aroma settings, press the Rotary Switch (1).
AROMA
Press the programming key
mode or select the next programming item using the Rotary
Switch (1).
READY

15.4 Programming the temperature

READY
Press programming key
FILTER appears.
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until Temperature is displayed.
TEMPERATURE
Press the Rotary Switch (1).
HIGH
Turn the Rotary Switch (1) to change the temperature from
HIGH to NORMAL (or vice versa).
NORMAL
(4) until
(4) to quit the programming
(4) until
To confirm the new settings, press the Rotary Switch (1).
TEMPERATURE
Press the programming key
mode or select the next programming item using the Rotary
Switch (1).
READY

15.5 Programming the time

You must programme the time if you want to use the auto-
matic switch-on function.
READY
Press programming key
FILTER appears.
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until TIME is displayed.
TIME
Now press the Rotary Switch (1) to start programming the time.
--:--
Turn the Rotary Switch (1) to adjust the hours..
12:--
Press the Rotary Switch (1) to confirm the hour settings and to
activate the minutes.
12:--
Turn the Rotary Switch (1) to select the minutes.
2:05
To confirm the new settings, press the Rotary Switch (1).
TIME
Press the programming key
mode or select the next programming item using the Rotary
Switch (1).
(4) to quit the programming
(4) until
(4) to quit the programming
E
15