Re-S-1800 Routing Engine Description For Mx Series; Re-S-1800 Routing Engine Components; Figure 13: Re-S-1800 Front View - Juniper MX480 Hardware Manual

Related
Documentation

RE-S-1800 Routing Engine Description for MX Series

Figure 13: RE-S-1800 Front View

Ethernet
Auxiliary
port port
Extractor
clip
Console USB Reset
port port button
Copyright © 2011, Juniper Networks, Inc.
NOTE: If the router boots from an alternate boot device, a yellow alarm lights
the LED on the router's craft interface.
If the Routing Engines are configured for graceful switchover, the backup Routing Engine
automatically synchronizes its configuration and state with the master Routing Engine.
Any update to the master Routing Engine state is replicated on the backup Routing Engine.
If the backup Routing Engine assumes mastership, packet forwarding continues through
the router without interruption. For more information about graceful switchover, see the
Junos OS System Basics Configuration Guide
NOTE: If two Routing Engines are installed, they must both be the same
hardware model.
MX480 Router Description on page 3
MX480 Routing Engine LEDs on page 27
MX480 Host Subsystem Description on page 20
MX480 Switch Control Board (SCB) Description on page 21
Figure 13 on page 25 shows the Routing Engine 1800.
SSD SSD
slot 1 slot 2
Extractor
clip
RE-S-1800 Routing Engine Components on page 25
RE-S-1800 Routing Engine Boot Sequence on page 26

RE-S-1800 Routing Engine Components

Figure 14 on page 26 shows the RE-S-1800 Routing Engine.
Chapter 2: MX480 Hardware Components
.
25