Oil Filter, Relief Valve And Oil Pressure Switch; Installing The Oil Pressure Switch - Mitsubishi diesel engines Service Manual

OIL SYSTEM - INSTALLATION

1. Oil Filter, Relief Valve and Oil Pressure Switch

Tightening torque:
7.85 to 11.8 N m
(0.8 to 1.2 kgf m)
[5.8 to 8.7 lbf ft]
Installation of the oil filter, relief valve and oil pressure switch
<Installation sequence>
‡ B • ¨ ‡ A • ¨ ‡ @

1.1 Installing the oil pressure switch

(1)
Using the special tool Oil Pressure Switch Socket
Wrench, tighten the switch to the specified
torque.
Special tool
Oil Pressure Switch Socket
Wrench
(2) Apply sealant (ThreeBond 1102) onto the
threaded portion of the switch.
(a) Apply proper amount of sealant so that it will
not be squeezed out to the tip of the
threaded portion.
(b) Do not overtighten.
4 - 10
Part number
MD998054
Tightening torque:
44.1 to 53.9 N m
(4.5 to 5.5 kgf m)
[32.5 to 39.8 lbf ft]
Tightening torque:
10.8 to 12.7 N m
(1.1 to 1.3 kgf m)
[8.0 to 9.4 lbf ft]
MD998054
Apply sealant here.
Installing the oil pressure switch
Tightening torque:
7.85 to 11.8 N m
(0.8 to 1.2 kgf m)
[5.8 to 8.7 lbf ft]