Mitsubishi diesel engines Service Manual page 60

3.8 Separating the
connecting rod
(1)
Remove the piston pin using the special tool
Piston Pin Setting Tool.
Special tool
Piston Pin Setting Tool
(2) Insert the tool's push rod into the piston pin hole.
Using a press against the push rod, extract the
piston pin.
(3)
Use the Piston Pin Setting Tool again to
reassemble the piston and the connecting rod.
Do not try to remove the piston pin by tapping
it.
If the piston has been agglutinated and
requires a great force to remove, replace it
with a new part.
piston from the
Part number
31A91-00100
ENGINE MAIN PARTS - DISASSEMBLY
Piston Pin Setting Tool
Push rod
Piston pin
Piston
arrow mark
Piston
Removing the piston pin (1)
Removing the piston pin (2)
Connecting rod
Identification mark
Tool body
2 - 15