Installing Oil Filter, Relief Valve And Oil Pressure; Installing Oil Pressure Switch; Installing Relief Valve - Mitsubishi L Series Service Manual

LUBRICATION SYSTEM

3.2 Installing oil filter, relief valve and oil pressure

7.85 to 11.8 N m
{0.8 to 1.2 kgf m}
[5.8 to 8.7 lbf ft]
39.2 to 49.0 N m
{4.0 to 5.0 kgf m}
[29 to 36 lbf ft]
3.2.1

Installing oil pressure switch

Do not allow sealant to squeeze out at the thread end.
Do not overtighten.
(1) Using an oil pressure switch socket wrench, tighten the
oil pressure switch to the specified torque.
(2) Apply a sealant to the threaded portion when installing
the switch.
3.2.2

Installing relief valve

Insert the relief plunger and relief spring into the gear case
and tighten the plug to the specified torque.
9-8
Installing oil filter, relief valve and oil pressure
7.85 to11.8 N·m
{0.8 to 1.2 kgf·m}
[5.8 to 8.7 lbf·ft]
Apply HERME SEAL H1 or
THREEBOND 1344N.
Installing oil pressure switch
Relief plunger
Gear case
Installing relief valve
Oil pressure switch
socket wrench
P/N:MD998054
39.2 to 49.0 N m
Plug
{4.0 to 5.0 kgf m}
[28.9 to 36.2 lbf ft]
Relief spring