Mitsubishi diesel engines Service Manual page 84

Note: (a) Apply sealant in a bead of 4 mm (0.1575 in.)
and in the illustrated pattern.
(b) Cutting the end of the sealant tube at the
illustrated location will provide a 4 mm
(0.1575 in.) bead.
(2)
Tighten the oil pan retaining bolts diagonally in
several steps, and finally to the specified torque.
ENGINE MAIN PARTS - REASSEMBLY
R17 (4 front and rear
locations in total)
9.5 mm
(0.37 in.)
R7 from hole center
36 mm (same for all 17 holes)
(1.42 in.)
Rear
R40 corresponding to
hole centers
(same for all 4 corners)
Apply oil pan liquid gasket here (top face)
Sealant application pattern
Cut here
Cutting the end of sealant tube
Tightening torque:
9.80 to 12.7 N m
(1.0 to 1.3 kgf m)
[7.2 to 9.4 lbf ft]
Installing the oil pan
Apply sealant as lined
Front
5 mm
(0.20 in.)
2 - 39