Mitsubishi diesel engines Service Manual page 178

ELECTRICAL SYSTEM - DISASSEMBLY, INSPECTION AND REASSEMBLY
Separating the front bracket from the stator core
(1)
With flat-head screwdrivers positioned between
the front bracket and the stator core, pry them
away from each other.
Do not insert the screwdrivers too deep, as it
can damage the stator core.
Removing the pulley
(2)
Protecting the rotor with cloth, place the front
(a)
bracket and rotor assembly in a vice. Remove
the pulley nut, then remove the pulley and the
spacer.
Pull out the rotor from the front bracket.
(b)
Removing the stator core and the rectifier
(3)
Unsolder the stator core leads at the rectifier.
(a)
Remove the stator core.
Unsoldering must be finished as quickly as
possible. Extended heating will damage the
diodes.
Loosen the retaining screws and remove the
(b)
rectifier.
Separating the front bracket
from the stator core
Removing the pulley
Rectifier
Soldered lead
Removing the stator core
Soldered lead
7 - 19