3.1 Installing the fuel injection nozzles
(1)
Install the gaskets onto the fuel injection nozzles.
(2)
Insert the fuel injection nozzles into the cylinder
head, and tighten to the specified torque.
3.2 Installing the fuel pipes
(1)
Install the fuel leak-off pipe onto the fuel
injection nozzles.
(2)
Install the fuel injection pipes, and hold them in
place with clamps.
(3)
Tighten the fuel leak-off and fuel injection pipe
nuts to the specified torques.
FUEL SYSTEM - INSTALLATION
Replace: Gasket
Tightening torque:
49.0 to 58.8 N m
(5.0 to 6.0 kgf m)
[36.2 to 43.4 lbf ft]
Installing the fuel injection nozzles
Tightening torque for
fuel injection pipe nuts
24.5 to 34.3 N m
(2.5 to 3.5 kgf m)
[18.1 to 25.3 lbf ft]
Installing the fuel pipes
Tightening torque for
fuel leak-off pipe nuts
20.6 to 24.5 N m
(2.1 to 2.5 kgf m)
[15.2 to 18.1 lbf ft]
3 - 31