2. Thermostat and Thermoswitch
Tightening torque:
39.2 to 49.0 N m
(4.0 to 5.0 kgf m)
[28.9 to 36.2 lbf ft]
<Installation sequence>
‡ C • ¨ ‡ B • ¨ ‡ A • ¨ ‡ @
2.1 Installing the thermostat case
(1)
Assemble the thermostat into the thermostat case.
(2)
Using a new gasket, install the thermostat
assembly onto the cylinder head.
2.2 Installing the thermoswitch
Apply sealant to the threaded portion of the
switch, and tighten it to the specified torque.
Sealant
Installation of the thermostat and thermoswitch
ThreeBond 1104
COOLING SYSTEM - INSTALLATION
Tightening torque:
18.6 to 26.5 N m
(1.9 to 2.7 kgf m)
[ 13.7 to 19.5 lbf ft]
Case bolt tightening torque:
39.2 to 49.0 N m
(4.0 to 5.0 kgf m)
[28.9 to 36.2 lbf ft]
Installing the thermostat assembly
Installing the thermoswitch
Cover bolt tightening
torque:
16 to 20 N m
(1.6 to 2.0 kgf m)
[11.6 to 14.5 lbf ft]
Tightening torque:
18.6 to 26.5 N m
(1.9 to 2.7 kgf m)
[13.7 to 19.5 lbf ft]
Apply sealant
5 - 11