Mounting A New Label Roll - Avery Dennison ALS 341 User Manual

Operators Manual
ALS 341

3.2 Mounting a new label roll

The threading path of the labelling material through the labeller is shown in the diagrams below.
A threading diagram is also affixed to the machine's front-plate for easy reference.
Figure 2 Threading diagram Type 341
Figure 3 Threading diagram Type 441
Before threading the new material, any waste backing paper should be removed from the
rewind mandrel as shown in the diagram below.
Turn the lever to retract the expandable pads. The waste backing paper can now be easily
pulled off the rewind mandrel.
Release 4/04 Page 13 Starting the labeller