Correcting Delay Between Channels (Input Delay) - Yamaha QL5 Reference Manual

SENDS ON FADER mode
1
MIX/MATRIX select button
Use the MIX/MATRIX select button to switch between MIX/MATRIX for the bus
displayed in the Function Access Area.
2
MIX/MATRIX bus select buttons
Select the buses that will be controlled by the faders.
3
Close button
Closes the SENDS ON FADER mode.

Correcting delay between channels (Input Delay)

1
This section explains how to correct delay between input channels by using the Input Delay
function.
This function is useful when you want to correct the phase variance caused by microphone
locations on the stage, to add depth to the sound by using phase variance, or to correct a
delay (a time gap) that may exist between video and audio that are sent from a site for
broadcast on TV.
3
STEP
1. Press the Bank Select keys in the Fader Bank section and the [SEL] keys on the top
panel to select the input channel.
2. Press the INPUT DELAY field in the SELECTED CHANNEL VIEW screen.
3. Use the [TOUCH AND TURN] knob to set the delay.
2
4. Press the DELAY ON button.
SELECTED CHANNEL VIEW screen
37
Input channels
INPUT DELAY screen
Reference Manual