Ch Copy Mode - Yamaha QL5 Reference Manual

CH COPY MODE window
This window enables you to copy channel settings.
1 4
1
SOURCE CH field
Displays the copy-source channel. While this window is displayed, press a [SEL] key on
the top panel to select a channel. The selected channel will be highlighted in this field.
If you want to re-select the copy-source channel, press this field.
2 3
If the copy source is a MIX/MATRIX channel, buttons will
appear so you will be able to select parameters to copy.
COPY TARGET field
• MODULE PARAMETERS button
Selected channel module parameters
• WITH MIX SEND/WITH MATRIX SEND button
SEND parameters of signals sent to the selected channel
2
DESTINATION CHs field
Displays the copy-destination channel. When you specify
the copy source, you can then select a copy-destination
channel (multiple selections are allowed) by pressing its
[SEL] key on the panel, and this field will be highlighted.
If you want to defeat all of the selected copy-destination
channels, press the DESTINATION CHs field.
NOTE
In the case of the QL1, faders that do not exist on the model
will not be shown.
3
COPY button
Executes the copy operation. After selecting the copy-source channel and copy-
destination channel(s), press this button to execute the copy operation.
4
CLOSE button
Press this button to close the window and return to the previous screen.
68
Channel Job
Reference Manual