Using The Cue Function - Yamaha QL5 Reference Manual

Digital mixing console
Hide thumbs Also See for QL5:
Table of Contents

Advertisement

0
Meter field
• Meters
Indicates the output level of the monitor L/R/C channels.
*1
DANTE1–64
Output channels 1–64 to audio network
*2
OMNI1–16
OMNI OUT jacks 1–16
DIGI OUT L/R
DIGITAL OUT jack on the QL unit
SLOT1-1–SLOT2-16
Output channels 1–16 of an I/O card installed in slots 1–2
*1. QL1: 1–32
*2. QL1: 1–8
NOTE
• You can specify output ports only for MONITOR OUT L and R, and monitor through two speakers.
• If you have not specified an output port for MONITOR OUT C, selecting the MONO (C) button or
LCR button as the monitor source will automatically cause the MONO channel signal to be
distributed to MONITOR OUT L/R.
A
ASSIGN field
If you have selected DEFINE in the SOURCE SELECT field, you can use the ASSIGN field
to specify multiple monitor sources. The following table shows the monitor sources that
you can select in the ASSIGN field.
MIX 1–16
MIX channels 1–16 output signals
MTRX 1–8
MATRIX buses 1–8 output signals
STEREO
STEREO L/R channel output signals
MONO (C)
MONO channel output signal
PB OUT
Recorder's PLAYBACK OUT signals
*1
INPUT 25-26–31-32
INPUT jacks 25–32
*1. QL1: 9-10–15-16
*2. QL1: 9–16
NOTE
You can select a maximum of eight monitor sources in the ASSIGN field. If you select eight
monitor sources, no further selections will be possible. Turn off the buttons of unneeded sources.
*1
*2
*2
signals (per two channels)

Using the Cue function

About CUE groups
Cue signals on the QL series console can be categorized into the following four groups.
1
INPUT CUE group
The cue signals of input channels make up this group. To enable cue for this group, press
the [CUE] key for any input channel to turn cue on.
Input channel [CUE] key
2
DCA CUE group
The cue signals of DCA groups make up this group. To enable cue for this group, press
the [CUE] key of one of the DCA groups to turn cue on.
DCA group [CUE] key
3
OUTPUT CUE group
The cue signals of output channels make up this group. To enable cue for this group,
press the [CUE] key of one of the output channels.
Output channel [CUE] key
MIX/MATRIX channel [CUE] key
91
Monitor and Cue functions
Reference Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ql1

Table of Contents