Setting Up The Dante Audio Network; Dante Setup - Yamaha QL5 Reference Manual

NETWORK window
1
2
1
IP ADDRESS
Specifies an address that identifies an individual device on the Internet or LAN network.
2
GATEWAY ADDRESS
Specifies an address that identifies a device (gateway) that converts data between
different media or protocols to allow communication within the network.
3
SUBNET MASK
Within the IP address used in the network, this defines the bits that are used for the
network address that distinguishes the network.
4
MAC ADDRESS
Indicates the MAC (Machine Access Control) address, which identifies a host in a
network. This address is for display only, and cannot be edited.
NOTE
The NETWORK connector on the QL series console transmits data via either 100BASE-TX
(transmission speed: maximum 100 Mbps) or 10BASE-T (transmission speed: max 10 Mbps).

Setting up the Dante audio network

You will use the QL series console to make Dante audio network settings for the console itself
and the I/O devices connected to the Dante connector of the QL series console. This section
3
explains how to make Dante audio network settings.
STEP
1. In the Function Access Area, press the SETUP button to access the SETUP screen.
2. In the DANTE field at the center of the screen, press the DANTE SETUP button to
4
open the DANTE SETUP window.
3. Press the SETUP tab in the lower part of the DANTE SETUP window.
192
SETUP screen DANTE SETUP window
Setup
Reference Manual