Monitor - Yamaha QL5 Reference Manual

4
MONITOR FADER field
Enables you to set and view the monitor fader that adjusts the monitor level.
• MONITOR FADER LEVEL knob
Adjusts the monitor fader level.
• FADER ASSIGN display
This area displays the type of faders that are currently assigned to the monitor fader.
Indicator assignments are as follows.
• ---- .......................................... No assignment
• MASTER A............................. Master A only
• MASTER A+ .......................... Master A, Master B, Custom fader bank
• MASTER B............................. Master B only
• MASTER B+ .......................... Master B, Custom fader bank
• CUSTOM................................ A single fader in the Custom fader bank
• CUSTOMs.............................. Multiple faders in the Custom fader bank
5
Meter field
Indicates the output level of Monitor Out channels L, R, and C. Press this field to open
the MONITOR window.
6
MONITOR OUTPUT button
Switches the Monitor Output on or off.
7
PHONES LEVEL LINK button
If this is on, the MONITOR FADER LEVEL knob or MONITOR FADER will adjust the level
of signals sent to the PHONES Out jack.
8
MONO MONITOR button
Turn on this button to switch monitor signals to mono.
MONITOR window
You can make detailed settings for monitoring. This screen appears when you press the
MONITOR display button or the meter field in the MONITOR screen.
1 2 3
1
SOURCE SELECT field
Select one of the following as the signal source that will be output to the MONITOR bus.
STEREO L/R STEREO L/R channel signals
MONO (C)
MONO channel signal
LCR STEREO L/R + MONO channel signals
*1
INPUT 25-26–31-32 INPUT jacks 25–32
PB OUT Recorder's PLAYBACK OUT signals
DEFINE The signal(s) selected in the ASSIGN field
Links the monitor source with the MIX/MATRIX bus
LINK
selected in SENDS ON FADER mode.
*1. QL1: 9-10–15-16
*2. QL1: 9–16
89
Monitor and Cue functions
4 5 6 7
0
A
8 9
*2
signals (per two channels)
Reference Manual