Remotely Controlling An Rio Unit - Yamaha QL5 Reference Manual

3
CLOSE button
Completes the settings and closes the window.
OUTPUT PATCH window
Displayed when you press the device in the I/O DEVICE screen (DANTE PATCH page). Set
the output patch.
1
1
Port select buttons
Press one of the buttons to open the PORT SELECT popup window.

Remotely controlling an Rio unit

This section explains how to remotely control an Rio unit that's connected to the Dante
connector.
STEP
1. In the upper part of the I/O DEVICE screen, press the Rio tab to display the I/O
DEVICE screen (Rio page).
2. Press the rack in which the I/O device on the head amp side is mounted.
3. Remotely control the head amp of the I/O device.
4. To remotely control a head amp from an input channel, press a knob in the
SELECTED CHANNEL section to display the SELECTED CHANNEL VIEW screen.
5. Press the GAIN/PATCH field of the channel you want to adjust. The GAIN/PATCH
window will appear.
6. Control the head amp of the I/O device in the GAIN/PATCH window.
7. When you have finished making settings, press the "x" symbol to close the window.
8. Press the rack in which the I/O device on the OUTPUT side is mounted.
9. Set the output port on the OUTPUT PATCH window, as necessary.
Refer to step 7 in "I/O device
129
I/O devices and external head amps
patching"on page 127.
Reference Manual