Inserting A Geq In A Channel - Yamaha QL5 Reference Manual

Inserting a GEQ in a channel

This section explains how to insert a GEQ into the selected channel for use.
STEP
1. Refer to steps 1–8 in "Virtual rack operations" on
and set its input source and output destination.
2. In the GEQ field rack or the EFFECT field rack, press the rack container in which you
mounted the GEQ.
3. If you're using a stereo source, press the GEQ LINK button to link the two GEQ units.
4. Press the GEQ ON/OFF button to turn the GEQ on.
NOTE
• If you are using a stereo source, you can mount a Flex15GEQ, or mount two 31BandGEQ units
in adjacent odd-numbered/even-numbered racks. This will let you link the two GEQ units in a later
step.
• You can view the input and output levels of the GEQ in the rack in the GEQ field.
• For details on GEQ operations, refer to the following section
the Flex15GEQ" on page 108.
GEQ EDIT window
NOTE
• The windows for the 31BandGEQ and the Flex15GEQ are nearly identical. However, the
Flex15GEQ individually displays two GEQ units (A and B) mounted in a single rack.
• Pressing a top panel [SEL] key while operating the GEQ will switch to the popup window of GEQ,
effect, or premium rack that is inserted in that channel.
2 3
1
1
Rack select tabs
Switch among GEQ 1–8, or among EFFECT 1–8. For a rack in which a Flex15GEQ is
mounted, the tabs will be split as xA and xB (x is the rack number).
page 103 to mount a GEQ in a rack
"Using the 31BandGEQ" or
4 5 6
2
INPUT button
Press this button to open the CH SELECT window, in which you can select the input
source of the rack. The operating procedure is the same as for the INPUT button in the
GEQ field.
3
OUTPUT button
Press this button to open the CH SELECT window, in which you can select the output
destination of the rack. The operating procedure is the same as for the OUTPUT button
in the GEQ field.
4
GEQ LINK button
Press this button to open the GEQ LINK window, in which you can link adjacent GEQ
units.
In the case of a 31bandGEQ, the GEQ units in adjacent odd-numbered/even-numbered
racks will be linked. In the case of a Flex15GEQ, the GEQ (A) and GEQ (B) within the
same rack will be linked.
"Using
• GEQ x➞y button ("x" and "y" are the rack number, or the rack number and
alphabetical character A or B)
The parameters of "x" will be copied to "y," and then linked.
• GEQ y➞x button
The parameters of "y" will be copied to "x," and then linked.
• RESET BOTH button
The parameters of both will be initialized, and then linked.
• CANCEL button
Cancels the link and closes the window.
NOTE
The GEQ LINK button is shown only if linking is possible. When you link
GEQ units, a symbol will appear in the GEQ field to indicate the linked
status.
5
FLAT button
Returns all bands of the currently-selected GEQ to 0 dB.
6
GEQ ON/OFF button
Switches the currently-selected GEQ on or off.
107
Graphic EQ, effects, and Premium Rack
Reference Manual