Copying The Parameters Of A Channel; Copying, Moving, Or Initializing A Channel - Yamaha QL5 Reference Manual

Digital mixing console
Hide thumbs Also See for QL5:
Table of Contents

Advertisement

5
CLOSE button
Closes the window.
NOTE
If you use QL5 settings data on the QL1, buttons will be shown crossed-out if they are assigned
to a channel that does not exist on that model.

Copying, moving, or initializing a channel

You can copy or move mix parameters between channels, or restore the parameters of a
specific channel to their default settings.

Copying the parameters of a channel

You can copy the mix parameter settings of a channel to another channel. When you execute
the copy operation, the settings will overwrite the parameters of the copy-destination.
You can copy between the following combinations of channels.
• Between input channels
• Between the STEREO L/R channel and MONO channel
• Between MIX channels
• Between MATRIX channels
STEP
1. In the Function Access Area, press the CH JOB button.
2. Press the COPY button in the CH JOB menu.
3. Press a [SEL] key to select the copy-source channel.
4. Press the [SEL] key for the copy-destination channel (multiple selections are
allowed).
5. If you have selected a MIX/MATRIX channel as the copy-source, use the buttons in
the COPY TARGET field to select the parameters you want to copy.
6. Press the COPY button to execute the copy.
Function
CH JOB
Access Area
menu
67
Channel Job
Reference Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ql1

Table of Contents