Custom Fader Bank - Yamaha QL5 Reference Manual

Custom fader bank

Groups that organize channels routed to the top-panel faders are called "fader banks."
There are input and output channel banks, as well as custom fader banks. Custom fader
banks enable you to select various combinations of channels, regardless of channel types.
This section explains how to set up a custom fader bank.
STEP
1. In the Function Access Area, press the SETUP button.
2. In the SETUP screen, press the USER SETUP button.
3. In the USER SETUP window, press the CUSTOM FADER tab.
4. Use the Bank Select keys to recall the fader settings to the top panel for the channels
you want to add to the custom fader bank.
5. In the CUSTOM FADER BANK/MASTER FADER page, press the bank select button for
the custom fader bank you want to set up.
6. In the CHANNEL ASSIGN field, press the select button for the fader you want to set
up.
7. Press a [SEL] key on the top panel to assign a channel to the fader number selected
in step 6.
8. To assign channels to other faders, repeat steps 5 through 7.
USER SETUP window (CUSTOM
FADER BANK/MASTER FADER page)
NOTE
• If you are logged-in as the Administrator, you can also turn on the FOR GUEST button to access
the CUSTOM FADER BANK/MASTER FADER for Guest page, and make custom fader bank
settings for the Guest account.
• You can also press the channel select buttons to assign channels to faders.
USER SETUP window
(CUSTOM FADER BANK/MASTER FADER page)
2
3
4
1
CUSTOM FADER BANK field
• Bank select buttons
Enable you to select a custom fader bank to which you want to assign a group of
channels.
2
Block indicators
Display the graphics of the top panel block and faders that are the current target for
editing.
The graphics vary depending on the console model.
QL5: B (16 faders), MASTER
QL1: B (8 faders), MASTER
3
Fader select button
Selects the target fader. Press this button to select it, then press [SEL] keys on the top
panel to add the corresponding channels to the selected fader bank.
4
Channel select button
Opens the channel select window, in which you can change the channel specified for
CHANNEL ASSIGN.
5
CLEAR ALL button
Clears all the current fader bank assignment. Pressing this button will open a
confirmation dialog box. Press OK to clear the assignment. Otherwise, press CANCEL to
return to the previous screen without changing the setting.
175
Setup
1
5
Reference Manual