Yamaha QL5 Reference Manual page 140

MIDI SETUP window (for port selection)
Here you can select the port that will be used to transmit and receive MIDI messages. This
window appears when you press the port select button for transmission (Tx) or reception (Rx)
in the PORT/CH field.
1 2
1
TERMINAL field
Enables you to select the port that will transmit or receive MIDI messages.
You can choose from the following items.
NONE No port will be used.
MIDI MIDI IN (Rx) and OUT (Tx) connectors on the rear panel
A card that supports serial transmission and is installed in Slot 1 on
SLOT1
the rear panel
2
PORT NO. field
If you select SLOT 1 in the TERMINAL field, choose port number 1–8 in this field. (The
number of available ports will vary depending on the card that is installed.)
The currently-available card is valid only for port 1.
3
OK button
Confirms the settings and closes the window.
3
MIDI SETUP window (for channel selection)
This parameter row enables you to specify MIDI Channels for MIDI message transmission
and reception. This window appears when you press the channel select button in the PORT/
CH field.
1
1
CH field
Enables you to select CH1–CH16 as the channel that will transmit or receive MIDI
messages.
2
OK button
Confirms the settings and closes the window.
140
2
Reference Manual
MIDI