Yamaha QL5 Reference Manual page 28

2
PATCH button
Press this button to display the PORT SELECT window to patch the input port to the
input channel.
PORT SELECT window
TAKE FROM CHANNEL button
TAKE FROM PORT button
• TAKE FROM PORT button
The HA settings of the port will take priority. Even if you change the patching, the HA
settings of the port will remain unchanged.
• TAKE FROM CHANNEL button
The HA settings of the channel will take priority. The HA settings of the port that had
been previously patched will be copied to the newly-patched port.
If the channel's HA settings are selected, the following HA settings will be copied from
the channel to the port that is patched. If you patch the input channel from an input that
does not have these settings (i.e., that does not have a HA), the default values will be
specified.
HA setting
HA gain amount
HPF on/off
Phantom power on/off
Gain compensation on/off
NOTE
If you're newly patching a previously-unpatched input channel, the default values will be specified
if the HA INFO field's TAKE FROM CHANNEL button is pressed.
Default value
–6dB
Off
Off
Off
3
HA section
Appears if the head amp is patched to the input channel.
NOTE
If the slot (for which the connection to the head amp is not recognized) is patched, the type of the
MY card will be displayed.
• +48V button
This button will appear for the input channel to which the head amp has been patched.
Press the button to switch phantom power (+48V) on or off.
• A.GAIN (analog gain) knob
Indicates the analog gain of the head amp. You can use the [TOUCH
AND TURN] knob to adjust the gain. If the Gain Compensation function
is turned on, an indicator will appear, showing the position of the
analog gain when the function is turned on.
• Level meter
Indicates the input signal level.
• GC (Gain Compensation) button
Switches the Gain Compensation function on or off for that channel.
4
AG-DG LINK button
Turns the analog gain and digital gain link on or off. When the link is turned on, the
digital gain is linked to adjustments made to the analog gain, even if Gain
Compensation is on.
5
Ø (Phase) button
Switches between normal and reverse phase settings of signals input.
6
D. GAIN (digital gain) knob
Indicates the digital gain value. You can use the [TOUCH AND TURN] knob to adjust the
gain. If the Gain Compensation function is turned on, digital gain will be used to adjust
the level of the signal input to the input channels.
7
Digital gain meter
Indicates the level after the signal passes through the digital gain.
8
GC ALL ON button/GC ALL OFF button
Switch Gain Compensation on or off for all input channels simultaneously.
9
AG-DG ALL ON button/AG-DG ALL OFF button
Switch all analog gain and digital gain links on or off simultaneously.
28
Input channels
Reference Manual