Remotely Controlling Wireless Unit; Wireless - Yamaha QL5 Reference Manual

I/O DEVICE screen (AMP page)
1 2
1
Display switch buttons
Press one of these buttons to view the corresponding I/O device.
For more information about VIRTUAL/CONFLICT/DUPLICATE displayed below this
1
button, refer to on page 127, "I/O device
2
ID/Model name display
This shows the ID number, model name, and version of the I/O device.
3
DANTE SETUP button
Press this button to open the DANTE SETUP window, in which you can make settings
for the audio network.
3
list."

Remotely controlling WIRELESS unit

This section explains how to remotely control a WIRELESS unit that's connected to the Dante
connector.
STEP
1. Press the WIRELESS tab in the upper part of the I/O DEVICE screen.
2. Press the I/O device displayed in the I/O DEVICE screen (WIRELESS page).
3. Set the output port on the OUTPUT PATCH window, as necessary.
Refer to step 7 in "I/O device
I/O DEVICE screen (WIRELESS page)
1 2
1
Display switch buttons
Press one of these buttons to view the corresponding I/O device.
For more information about VIRTUAL/CONFLICT/DUPLICATE displayed below this
1
button, refer to on page
2
ID/Model name display
This shows the ID number, model name, and version of the I/O device.
132
I/O devices and external head amps
patching" on page 127.
3
127, "I/O device list."
Reference Manual