Metz Axio pro Operating Instructions Manual page 92

Opening the menu
MENU
Configuration
2) Possible only on sets equipped with this function.
3) See glossary for an explanation.
92
20.3 Setting Stations
The DVB-C station search operation searches the
entire frequency band for TV and radio stations.
All stations which are found are placed in separa-
te TV and radio station tables. See Section 25 for
details of DVB radio mode.
If you are not satisfied with the order in which the
stations are displayed, you can move them to
other positions or delete unwanted stations (see
Section 22.Sorting stations.
Executing the automatic search
• Press the
• Press the red key
F1
Function for F2
Function for F1
EURO sockets
DVB-C
2)
DVB-T
2)
DVB-S
2)
Analog-TV
2)
Country
Language
Operating
Symbol rate 1 3) 6900 Precision search
Symbol rate 2 6875 Start station search
Symbol rate 3
with the key
or the person setting up the system about this. Fine
search is required if the stations are not tuned to the
channel centre.
• Select the menu line "Start program search"
• Press key
Automatic DVB-C station search
key to open the TV menu.
guration".
• Press the numeric key
• The cursor is on the menu
• Press key
☞
General settings
Manual search
Automatic search
off
. Ask your cable network provider
with the cursor control key
and confirm the question about
the station search with the corresponding nume-
ric key:
free-to-air programs
all programs
3)
free + CICAM programs
After pressing the corresponding numeric key
the program search begins.
to open the menu "Confi-
select "DVB-C".
line "Automatic search".
. The cursor
is on symbol rate 1.
The most common symbol
rates were set in the facto-
3)
ry. Changing the setting is
normally unnecessary. If
this setting of the symbol
rates does not lead to the
desired result, other symbol
rates must be set and saved
.
3)
.
3)
2)
to