Metz Axio pro Operating Instructions Manual page 7

• Do not place burning candles or
vessels containing liquids (vases, etc.)
on top of the TV set, since any hot wax
or water dripping into the set could
cause serious damage to the electronic
components and could also jeopardise
the electrical safety of the set.
• Lightning can damage electrical equip-
ment. A lightning flash entering the
power cable or the aerial cable can
damage the TV set even if it is swit-
ched off. You should therefore discon-
nect the power cable and aerial cable
from their outlets or from the TV set in
the case of a thunderstorm.
• The monitor may be opened and
repaired only by a qualified person.
CAUTION! HIGH VOLTAGES CAN KILL !
If repairs should be necessary, consult
your local dealer.
• Always switch off the TV set before
cleaning it.
• Do not hold the remote control directly
in front of your eyes and press a but-
ton. The remote control emits infrared
radiation!
• Do not place rechargeable batteries in
the battery compartment of the remote
control. Use only two 1.5 V dry batte-
ries of the type LR03/AM4/AAA
(Micro).
• The TV set is intended only for the
reception and reproduction of picture
and sound signals.
2. Safety notes
• The TV set may be operated only from
a mains voltage of 230-240V VAC,
50 Hz. Australia: 240 VAC.
• Do not demage the power cord or plugs.
In the event of repair or maintenance the
power cord must be able to be easily dis-
connected.
• Lay the power cord so that there are
no objects resting on it and no-one
can trip over it!
• Do not display still images, logos, 4:3
pictures with stripes etc. over an exten-
ded period. These still images can
result in marks on the screen.
• Lay the power cable so that nothing
stands on it and no-one can trip over
it.
• Keep candles and open flames away
from this product at all times to prevent
fire spreading.
• Grime and dust deposits can accumu-
late behind the front panel glass of the
LCD TV set without a visible source
being present. These grime and dust
deposits are also known as „fogging"
or „magic dust". There are scattered
instances of this phenomenon, but
especially during the warm-up period
and after renovation work or in new
constructions. Various factors can cau-
se the above mentioned phenomenons,
see also reports on the Internet.
In such cases cleaning or replacement
of the panel is excluded from the gua-
rantee, since it does not involve a set
defect, but rather an external influen-
ce.
7