Metz Axio pro Operating Instructions Manual page 125

30.3 Connecting a Hifi
Amplifier/AV Receiver
Registering the AV Device with the TV
• Enter the TV menu by pressing "MENU".
• Press the yellow key
menu.
• Use the cursor control key
Amplifier" in the device selection.
• Press "OK" twice, use the cursor control key
select "Signal Types", and press "OK"..
• For connection type
"Signal IN - SPDIF".
For connection type
"Signal IN – Stereo".
Confirm the setting by pressing "OK"
• Press the "EXIT" key to close the TV menu.
Sound:
• To configure the sound settings of the LCD TV,
press the yellow key
trol key to select the menu item "Sound via ...".
• For connection type
select "Sound via Hifi".
The speakers of the LCD TV are muted. The
sound (AC3 or stereo sound) is rendered over the
speakers of the Hifi set.
• For connection type
select "Sound via surround".
The speakers of the LCD TV are used as the centre
box. The sound (AC3 or stereo sound) is rendered
over the speakers of the Hifi unit.
to open the "AV Devices"
to select "Hifi
, select the signal type
, select the signal type
and use the cursor con-
, use the V-/V+ key to
, use the V-/V+ key to
Opening the menu
to
125