Metz Axio pro Operating Instructions Manual page 22

Opening the menu
0/
AV
22
If you now start to play back a recording on the
connected AV device, the TV set changes automa-
tically from any other program position to the
playback mode.
AV playback
(devices without switching voltage)
☞
6 HDMI 1
5 YCbCr
4 Front
3 Foto
2 DVD Player 1 • Press key
1 DVD/Videorec.1
AV
• Use the corresponding numeric key to select the
AV device you want to use.
• The TV set now changes from the current pro-
gram to the selected playback device.
• Start the replay function on the AV device. This
AV selection remains active until you switch to
any other program position.
• After watching the film from the AV device,
press the
mode.
☞
If the same AV device is to be selected quite
often, then the AV button can also be pro-
grammed for that AV device. See Chapter
17. "Programming Function Buttons".
10. AV Playback
Before they can be used, AV devi-
ces must be registered and assig-
ned to the appropriate input so
ckets in the menu 30."AV devi-
ces".
briefly - the function
programmed for AV devices (see
Chapter 17 "Programming function
buttons") is executed. Press button
or approx. 3 seconds - the max. possi-
ble selection is displayed.
key to return to normal TV