Colour Standard - Metz Axio pro Operating Instructions Manual

Opening the menu
MENU
F2
²
0010
0009
0008
0007
0006
0005
0004
Station table
0003
0002
0001
EXIT
The number of subjects and sections depends on
the selected scope of operation. Depending on
the configuration of the TV set, the various menu
items may be displayed in a different order and
numbered differently.
88
20.1 Setting Stations
The TV set will normally detect the colour standard
automatically.
If this automatic selection does not provide satis-
factory results (which should happen only rarely),
you can select the colour standard manually for
each program position.
The colour standard is set in the factory to "Auto-
matic".
Setting the colour standard
• Press the
F1
Hessen 3
Südwest
Sound corrections
MDR

Colour standard

PRO 7
Picture quality
RTL 2
Picture correct.
✗
RTL
SAT 1
Station contained in EPG
CA module
Bayern 3
Signal quality
ZDF
Frequency/channel
ARD
Colour standard SECAM
• Use the V-/V+ key to select the desired colour
standard, or to step through the available colour
standards until the picture is displayed clearly.
• Press the
• Press the
Colour standard for analogue stations
key to open the TV menu.
• Press the white key
open the station table.
• Press the
3)7)
ble editing of the station
table.
Enter logo
• Use the cursor control key to
select the program position
whose colour standard you
wish to change.
7)
• Press the cursor control key
to move to the left
column.
• Use the corresponding
numeric key (in the exam-
ple:
"Colour standard".
key to confirm your selection.
key to close the TV menu.
3) See glossary for an explanation.
7) Available only for analogue stations
to
key to ena-
) to select