Selecting Satellite - Metz Axio pro Operating Instructions Manual

Opening the menu
MENU
Configuration
Satellite
Low band
High band
EXIT
2) Possible only on sets equipped with this
function.
98
20.4 Set-up of satellite system
☞
You can set up to four satellites in the menu
"Configuration". No satellite is set in the factory.
The LNB frequency is used to switch between the
high and low frequency bands. The default fre-
quencies Low band 9.75 GHz and High band
10.60 GHz are set in the factory.
Selecting satellites
Function for F2
Function for F1
EURO sockets
DVB-C
2)
DVB-T General settings
2)
DVB-S 2) Manual search
Analog-TV
2) Automatic search
Country
Language
Operating
Astra 19,2°
9,75 GHz
10,60 GHz
• Use the cursor control key to select "Low band"
or "High band". The settings depend on the
components installed in the satellite antenna. For
the correct settings, please consult the data sheet
or the label of the LNB(s) being used.
• Press the
• Press the
Selecting satellites
Section 20.4 only in the case of corres-
ponding equipment or conversion.
• Press the
the TV menu.
• Press the red key
open the menu "Configura-
tion".
• Press the appropriate nume-
ric key (in this example
select "DVB-S".
Hot Bird 13°
• Press the appropriate nume-
Astra 19,2°
ric key (in this example
Arial facility
select "Satellite A".
• Use the V-/V+ key to select
the desired satellite. The
common satellites are called
up in order and the accom-
panying symbol rates set
automatically.
key to confirm the new settings.
key to close the TV menu.
2)
key to open
to
to
to